Skip to main content

Poly+ License Management

The following procedures cover the activation and assigning of Poly+ licenses in Poly Lens.
Note: To assign licenses to personal USB devices, the Poly Lens Desktop app is required to associate these devices with Poly Lens. See Onboarding Personal USB Devices for information on onboarding these devices into Poly Lens.

Assign Licenses

Note: Before you can Assign Poly+ Licenses, you must Activate the License. See Activate a License for detailed information.

There are two methods to assign the licenses provided with the Activation Key to devices on Poly Lens.

Auto-Assign All Licenses

  1. Select the Account to assign licenses in.
  2. Go to Manage > Licensing.
  3. Select Poly+ from the side tabs.
  4. Select Setup > Assign your Licenses.
  5. Select the Device Model link of the device type to auto-assign licenses to.
  6. Select Auto-Assign All to assign licenses to all the devices listed.
    Note: This is a one time action and only works for devices that are currently available. It can be applied again when additional devices are available.

Manually Assign Licenses

To manually assign a license to an individual device.

  1. Select the Account to assign licenses in.
  2. Go to Manage > Licensing.
  3. Select Poly+ from the side tabs.
  4. Select Setup > Assign your Licenses.
  5. Select the Device Model link of the device that you are wanting to assign a license to.
  6. On the License Assignments page, select one or more devices from the list.
  7. Select Add License.
  8. Select Confirm.
    Note: Once a device is assigned a Poly+ license, this action cannot be undone.
  9. The information on the License Assignments will now update for the device(s) selected to show a Poly+ status of Licensed.
  10. To license another device that is a device model, select the device model type from the License Assignments drop-down, and repeat the above process.