The following items are Onboarding (adding a device) troubleshooting tips.
If the QR code disappears (displays for 30 seconds), you can:
- Obtain the PIN from the system web interface of the device, under Servers > Cloud.
- Restart the device, to display the QR code again.
If the PIN does not display on the device, check the Registration Status code:
- Online - The device is already onboarded, but may be to an account or an environment you are not using or even have access to.
- Not Registered - Is a code your device shouldn’t give. Reboot the device to generate a fresh PIN.
- Not Connected - May mean that you do not have a primary network and you need to plug an actual cable in instead of using Wi-Fi alone. Check that you have a primary network config and IP.
- Blank field - A blank field suggests that the device is not on a build that supports cloud registration to products such as Poly Lens. Verify that the device is running 3.2 or higher.
- PIN with more than 6 characters - A PIN that has more than six characters suggests this is an older build that supported onboarding to the Orion platform. In this case, upgrade to Poly OS 3.0.1 or higher.